-
ACCEL 150821 Performance Fuel Injector
Maintains precise control of fuel delivery and atomization for more power better throttle response and improved fuel economy
Special EV1 design is compatible with gas E85 or methanol
All new not a modified stock injector and not remanufactured from a used core -
ACCEL 150824 Performance Fuel Injector
Maintains precise control of fuel delivery and atomization for more power better throttle response and improved fuel economy
Special EV1 design is compatible with gas E85 or methanol
All new not a modified stock injector and not remanufactured from a used core$587.27$273.97 -
AEM (30-3300) V2 1-Gallon Water/Methanol Injection Kit with Internal MAP Sensor
Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs
Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid
Internally-bypassed water/methanol injection pump does not cycle on/off and provides quiet, smooth operation; it features robust construction including integral hose fittings -
AEM (30-3304) V2 Water/Methanol Injection Standard Controller Kit with Internal MAP Sensor
Legal in California only for racing vehicles which may never be used upon a highway
AEM strongly recommends that users never exceed a 50 percent methanol concentration when using any AEM Water Methanol system or component
Methanol is a toxic and highly flammable chemical; 100 percent Methanol ignites easily and burns vigorously with an almost undetectable flame$199.95$142.14 -
AEM (30-3305) V2 Multi-Input Water/Methanol Injection Standard Controller Kit
Legal in California only for racing vehicles which may never be used upon a highway
AEM strongly recommends that users never exceed a 50 percent methanol concentration when using any AEM Water Methanol system or component
Methanol is a toxic and highly flammable chemical; 100 percent Methanol ignites easily and burns vigorously with an almost undetectable flame -
AEM (30-3350) V2 1-Gallon Water/Methanol Injection Kit with Multi-Input Controller
Multi-Input, 0-5V/frequency-based progressive controller design for use with external MAP sensor for boost or MAF/IDC on high compression NA gas vehicles
Multi-Input controller features large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test buttons for enhanced splash resistance and mounting tabs
Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid boost safe failsafe output included -
AEM (50-1205) E85-Compatible High Flow 320 LPH In-Tank Fuel Pump
The AEM Center Inlet E85 High Flow Fuel Pump is designed for in-tank mounting and features a compact 39mm diameter that fits most applications
Tested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline
Each pump is tested to flow 320 LPH at 43 PSI; Center Inlet -
AEM 25-100BK Black High Volume Fuel Rail
Applications: 94-01 Acura Integra RS, LS, GS and GSR B18
O.E. fuel pressure regulator or AEM adjustable fuel pressure regulator mounts directly to rail with no modifications
Specifically engineered for each application -
AEM 25-300BK Black High Volume Adjustable Fuel Pressure Regulator
Applications: 94-01 Acura Integra RS, LS, GS and GSR
Applications: 86-89 Honda Accord Lxi, Sei and 90-93 Honda Accord DX, LX, SE, EX (Must use AEM Rail) and 92-95 Honda Civic VX, CX, DX, LX and EX
Applications: 99-00 Honda Civic Si and 93-95 Honda Del Sol S, Si and 94-97 Honda Del Sol VTEC -
AEM 50-1005 Inline High Flow Fuel Pump (380lph)
The AEM 380lph High Flow Fuel Pump is designed for use with gasoline; Alcohol fuels can be used, but pump life will be diminished; The inlet thread is a -10 AN female ORB (O-ring port fitting) and the discharge is a female -6 AN ORB (O-ring port fitting)
A male -6 to -8 AN discharge fitting with integral high pressure check valve, terminal nuts, terminal boots and installation instructions are included
Designed for high output naturally aspirated and forced induction EFI vehicles$215.15$129.00 -
AEM 50-1200 E85 In-Tank Fuel Pump
Tested and compatible with ethanol fuels up to E100 methanol; fuels up to M100 and all types of gasoline
Designed for high output naturally aspirated and forced induction EFI vehicles
Each pump is tested to flow 320 LPH at 43 PSI$167.48$105.93 -
Aeromotive 11101 Platinum Series Fuel Pump
ORB-10 inlet and outlet ports
Fully submersible for custom, in-tank placement.
Fuel Injected Engines: up to 1300 HP – naturally aspirated; up to 1000 HP – forced air induction -
Aeromotive 13101 A1000 Series Injected Bypass Fuel Regulator
Adjustable base pressure from 40 to 75 PSI
Gasoline and alcohol compatible
Fuel pressure rises on a 1:1 ratio with boost -
Aeroquip FCN0820 AQP Black -08AN Socketless Hose – 20 Feet
Good looking black AQP elastomer cover over textile braid reinforcement for durability, with patented AQP elastomer smooth bore inner tube
Easy to assemble with Aeroquip Socketless fittings, so you never need a clamp
Excellent choice for a range of applications, including fuel, lube, coolant, and air lines -
aFe Power Silver Bullet 46-33017 Ford Throttle Body Spacer
In-house dyno testing resulted in max gains up to +16HP and +17 lbs. x ft. of torque.
Precision machined from 6061-T6 billet aluminum for lightweight, high strength and perfect fit and finish.
Serrated/Helix combination design for optimum airflow into the combustion chamber -
aFe Power Silver Bullet 46-34004 GM Throttle Body Spacer
In-house dyno tested.
Precision machined from 6061-T6 billet aluminum for lightweight, high strength and perfect fit and finish.
Serrated/Helix combination design for optimum airflow into the combustion chamber -
aFe Power Silver Bullet 46-37001 Honda Throttle Body Spacer
In-house dyno testing resulted in max gains up to +10 HP and +8 lbs. x ft. of torque
Precision machined from 6061-T6 billet aluminum
Serrated/Helix combination design for optimum airflow into the combustion chamber$115.00$109.00 -
Airaid 200-540 PowerAid Throttle Body Spacer
Installs in minutes with simple hand tools
Comes with all required hardware for a clean installation
Improves low-end torque and throttle response -
Airaid 200-550 PowerAid Throttle Body Spacer
Installs in minutes with simple hand tools
Comes with all required hardware for a clean installation
Improves low-end torque and throttle response -
Airaid 200-617 PowerAid Throttle Body Spacer
2007-2013 > Cadillac > Escalade > V8 6.2L V8 6.0L
2013-2013 > Cadillac > Escalade > V8 6.2L > (Canadian)
2007-2013 > Chevrolet > Avalanche > V8 5.3L V8 6.0L -
Airaid 400-531 PowerAid Throttle Body Spacer
Installs in minutes with simple hand tools
Comes with all required hardware for a clean installation
Improves low-end torque and throttle response$162.99$116.91