Frequency Range 28.000-29.700MHz(Programmable);Frequency Band A/B/C/D/E/F/G/H/I;Channel 40channels(programmable)in each band;Frequency Control Phase-Locked-Loop Synthesizer;Frequency Step 100Hz、1KHz、10KHz、100KHz、1MH;Frequency Tolerance 0.005%;Frequency Stability 0.001%;Temperature Range -20℃to +50℃ ;Microphone with push-to-talk /UP/DN and coiled cord;Input Voltage 13.8
Dimensions (in mm) 250(W) x280(L) x 60(H);Weight 1.5kg
Big LCD displays frequency and all kinds of information FM、AM、USB、LSB、PA mode Frequency Tuning Step 100Hz、1KHz、10KHz、100KHz、1MHz
MOTOTRBO, DMR, dPMR, APCO P25, NX DN, D-Star, Yaesu, Kenwood and Alinco EJ-47U as well as conventional analog signals including AM, wide and narrow FM, upper and tower sideband and CW
Giving monitoring operators the ability to receive a wide variety of digital and analog frequencies, the AR-DV1 can be used by military, federal state and local law enforcement agencies, emergency managers, diplomatic services, news-gathering operations and home monitoring enthusiasts in areas where government law enforcement, amateur radio operators and public safety agencies use different digital formats.
The AR-DV1 can be operated independently or computer controlled (programmer friendly command list supplied) for easier programming and monitoring.
Antenna Tuner for HF Tranceivers – Handles 300 Watts.
SO-239 rear Inputs for the Antenna and the transceiver, 3 front manual controls for Tuning.
1.8-60Mhz ( 6 thru 160 Meters) frequency range. (Ham Radio, CB, HF)
The latest IF DSP technology is employed in the IC-7200. While the IC-7200 is an entry-class transceiver, advanced digital features are comparable to higher class transceivers.
Waterproof protection technologies that are used in Icom’s marine radios are applied to the buttons and knobs on the front panel to provide a measure of protection against water intrusion. *IC-7200 is not waterproof.
AGC loop management Distortion and blocking from strong nearby signals are prevented by placing DSP functions inside the AGC loop. The AGC time constants are selectable from fast, slow and off for each operating mode.
The ID-5100A receives 118-174MHz and 375-550MHz* with dual receiver capability that allows you to receive two bands simultaneously (including within a single band)*
The ID-5100A has simultaneous receive for FM/FM and FM/DV modes, and the capability of monitoring two DV signals.
The ID-5100A/E has integrated GPS which allows you to transmit and receive position data from the built-in GPS receiver. Position, course, speed and altitude are shown on the display.
Switchable VHF/UHF dual band – 50W* output power both VHF/UHF band
Built-in noise filter (AM/FM) mode -Data and 9600/1200bps packet jacks on the rear panel
Auto repeaters function* automatically turns on/off duplex operation and tone encoder
Automatic Position Reply, FM Analog Voice or D-STAR DV, Built-In GPS Receiver
Rugged IPX7 Waterproof Construction, AM and FM broadcast Bands, Directional Keypad Navigation
Micro SD Card Slot, Faster Data transfer in DV mode
Online Auto Parts World / onlineautopartsworld.com